ICOM IC-2820H

• Dual Band UHF-VHF Base Radio
• Frequency Range: VHF 137-173.990Mhz - UHF 400-470MHz
• 50W output on both VHF/UHF bands
• VHF 50 W, 15 W, 5 W selectable
• UHF 50 W, 15 W, 5 W selectable
• Separate controller from main unit
• Diversity receive capability
• ±2.5ppm high frequency stability with TCXO unit
• Total 522 alphanumeric memory channels
• CTCSS, DTCS tone squelch operation
• 16 DTMF memory channels
• Green to amber variable display background
• 9600 bps packet terminal, mini-Din (6-pin) connector
• Max 45 channel/ sec. high speed scan capability in programmed scanning mode
• Band scope function
• Modulation system: variable reactance frequency modulation
• Max. frequency deviation: ±5.0 kHz
• Spurious emissions: Less than -60 dB
• Microphone connector: 8-pin modular jack (600 ohms)
• ±2.5ppm high frequency stability with TCXO unit
• Green to amber variable display background color
• 104 × 2 DTCS/50 CTCSS tone squelch operation
• Max. 45 channel/sec. high speed scan capability in programmed scanning mode
• 9600bps packet terminal, mini DIN (6-pin) connector
• Long or short squelch delay
• Automatic attenuator
• FM narrow capability
• Sub-band auto mute function
• 16 DTMF memory channels (24 digits)
• DTMF pager and code squelch function
• Auto power off
• Auto repeater function (USA version only)
• Number of memory channels: 522 (including 2 call and 20 band edge channels)
• Antenna connector: Two SO-239 (50 ohms)
• Power Supply requirement: 13.8 V DC ±15%
• Useable temperature range: +14 to +140 °F, -10 to +60 °C
• Frequency stability: ±10 ppm
• Tuning step increments: 5, 6.25, 10, 12.5, 15, 20, 25, 30 and 50 kHz
• D-STAR DV mode + GPS receiver (optional UT-123)
• Location information exchange 
• GPS alarm 
• GPS location tracking 
• One touch reply function 
• Built-in voice recorder and auto reply function 
• Low-speed data communication 
• DX communication over the D-STAR system 
• Antenna connector: Two SO-239 (50 ohms) 
• Power Supply requirement: 13.8 V DC ±15%